Now want to install a car in front of the car B is too difficult. Check the car that is the level of primary school, said the price up to junior high school just graduated from it, can be seen with the level of displacement is the ultimate goal. But the car manufacturers with just like a good, tail marked with a wide variety of different, that is not directly tell you displacement, saying that this effort is too heavy!

To say the displacement logo, it can not but mention the Audi. This guy thieves broken, the first to bring up a wave of black body, followed by the beginning of the wave (long), and then even played a displacement of digital games. However, you play it fills, and other car manufacturers actually have to follow suit Well, now there are not many waves (long), do not play the digital game car manufacturers. The The
Click on the accelerated formula - Audi (want to learn me? You really can not learn!)

This way of naming, needless to say you can think of who is it Audi boss may think that the car "four circles" by an popsicles to imitate, so think of an absolutely not the same. With a complex formula to show the car's ability to accelerate.
100 km ÷ 1 hour ÷ 0-100 km acceleration time × 10 = result (rounded)
Is not looking at the chaos? Do not say you, I also faint. We simply say is: 278 ÷ 100 km acceleration time = TFSI value
A little bit clear? Well, for example, the road on the common Audi A4L and Audi A6L have 45 TFSI models, do not think that the same displacement, the former is 2.0T but the latter 3.0L mechanical booster. If you want to ask me how to remember Wrong, back it! Oh yes, Audi has a turbocharged models and did not follow the naming rules, is the A6L 1.8T models, the tail is called TFSI, in front of no figures Oh.
The most kind of named - Lexus (I heard you like the big numbers? Plus 0 is not finished, nice and easy to remember)

Said the kind of manufacturers, non-Lexus is none other than. I said is not the price, but the tail standard. According to the actual discharge standard is too small? Simple, plus a 0 is friends. 2.0 displacement change 200, 2.5 displacement becomes 250, as the turbocharged models, followed by a T. Of course, there are special, such as Lexus hybrid models, 200h representative equipped with a 1.8L self-priming engine + motor; 300h is equipped with a 2.5L self-priming engine + motor; 450h is equipped with 3.5L self-priming engine + motor.
Named by horsepower - Lamborghini, McLaren, Ford, Cadillac

With the engine horsepower to name models, can be described as the world's first named models. Name + how much Ps simple and rude. And now there are still many car prices using such a naming, such as Lamborghini to "LP + horsepower" in the form of the name, the first for the LP640, then have 580,610,700,750 and so on. McLaren in addition to its family flagship model P1, the rest of the models are also used to directly named the way horsepower.

In addition to ultra-running, the Ford from 2016 began to use the horses named after the way, but compared to Lamborghini hundreds of large numbers at every turn, Ford's 125,180 how to look like a motorcycle displacement. So Ford in front of the figures with the words of EcoBoost. Simply say EcoBoost 125 is 1.0T engine, EcoBoost 180 is 1.5T engine, EcoBoost 200 is 2.0T low power engine, EcoBoost 245 is 2.0T high power engine, EcoBoost 325/330 is 2.7T engine. Why the lack of Ford 2.3T and 3.5T engine? Because ... ... domestic Changan Ford models are not equipped with these two engines, and foreign countries do not like this naming.

Having finished Ford to see its American brother Cadillac. Big Kaidi is also bad in China. The United States home on the honest and practical 2.0T, 3.0T, and to China has become 28T and 40T. In fact, Cadillac is also based on the maximum torque of the engine named. 2.0T maximum power of 276Ps, 3.0T maximum power 405Ps, Minato zero to become 28T and 40T.
Press the torque named - Volkswagen, Honda, Peugeot, Citroen, Changan, Chuan Qi

Saying that this should be the most mainstream naming, and why the mainstream? Use more chant! If the editor did not remember correctly, this naming is the first to be led by the crowd up the wave. Not only to the car bigger, displacement logo should be large, who let the Chinese people like "big" it. After all, the torque value of the engine is often greater than its power value, so the public is very witty to use the "engine torque (digital) + engine technology type (TSI)" naming, there are 160 (1.6L), 180 (1.2T) 230 (1.4T), 280 (1.4T high power), 330 (1.8T), 380 (2.0T), 480 (3.0L mechanical supercharger). Not much, or full remember drops. The public have done this, as its brother Skoda do, must copy myself.

Of course, in addition to the public, Honda from 2016 has gradually spread the turbocharged engine, and its naming is also the name of the torque. Honda currently has 1.0T three-cylinder, 1.5T four-cylinder and 2.0T four-cylinder, tail, respectively, corresponding to 180TURBO, 210TURBO (Jade) / 220TURBO (Civic) / 240TURBO (crown) and 370TURBO. As for why the same as the 1.5T engine but in different models on the naming inconsistency? Easy. Because the power adjustment is different, resulting in the maximum torque is not the same. So look, compared to the crowd get that interval value method, Honda is still very sincere.

Say the French car does not take the unusual way, and in the rear logo on the same "wonderful work." Although the Peugeot and Citroen used by the engine torque named way, but ... 1.6T engine is clearly not 350Nm maximum torque. In fact, Peugeot and Citroen rear XXX THP has its special naming. The first digit represents the engine series (entry, core, high and top), and the second and third digits represent the last two digits of the torque, and of course you must be rounded. Such as 1.6T engine maximum power 245Nm, leaving only two and rounded after 50 friends, so you will see 350 THP rear logo.

And Changan, Chuan Qi, etc. equipped with turbocharged engine models have also used the engine maximum torque and named tail. Naming rules are extremely easy, that is, the maximum torque + T. Of course, will take the whole Oh.
New energy car naming - the largest mileage, battery capacity, 100 km to accelerate
New energy models drive the form is different from the traditional fuel vehicles, and the tail of the naming of the way the same is different from the internal combustion engine models. Most models are named with the largest battery life, such as Beiqi EV200, Qin EV300 and so on. And there are two very fun cases. One is Tesla models equipped with the battery capacity to name: 60D on behalf of 60KWH battery capacity, 75D on behalf of 75KWH, and so on. The other is the famous name of the BYD friends. The rear will be surprised to write 4.9S, do not think this is 4.9L engine, in fact, especially its 100 km to accelerate only 4.9 seconds.
Scare people named - Buick, Po Wo, Roewe (want to call what completely with the mood!)

The last kind, do not take the unusual way of "bluff" type car standard, such as Buick. Other manufacturers will change the end of the turbocharged models, and Buick even natural intake engine models also re-named, the most strange is not the name of the uniform, such as 1.5L heroin was named 15N, with 1.5 L ranked Wei Lang is named 15S, the N and S is not too casual with it? But fortunately turbocharged engine naming is also more uniform, named after the 18T 18T, 1.5T named 20T, 2.0T is named 28T. As for the naming of the way ... ... with the boss's mood?

And BBAB in the last B - Po Wo, also belong to this whimsical naming. 1.8T turbocharged engine maximum power 140kW (190Ps), the maximum torque of 280Nm, and it is named 25T; 2.0T turbocharged engine maximum power 165kW (224Ps), the maximum torque of 300Nm, was named 28T. Seemingly nothing to do with the power ah. The whole of my face Meng Zhu.

And this naming is not a few, Roewe will also be renamed its models 16T, 20T, 30T. Is not looking like much like 1.6T, 2.0T and 3.0T? In fact, respectively, corresponding to 1.0T three-cylinder engine, 1.5T four-cylinder engine and 2.0T four-cylinder engine. As for the law, anyway, I did not find the editor, please also know that big tell.
The most unusual way to name - Volvo (I called this heritage!)


Metersbonwe has an advertising pragmatic in the Volvo who is the most appropriate, do not take the unusual way! Other car manufacturers up to play personality name, and Volvo's tail is completely named ... ... forget, do not explain their own look. T3, T4, T5, T6 and T8, Global unique. And more fun is that in addition to T3 is equipped with a 1.5T engine, from T4 to T8 with all 2.0T. T4 is 2.0T low power; T5 is 2.0T high power; T6 is 2.0L mechanical + turbocharged; T8 was 2.0L mechanical + turbo + plug-in hybrid. Chaos If this has been trouble do not understand, I advise you to burn the following special you or a direct PASS out of it.
Changing the name - Mercedes-Benz, BMW (want to study my through Well, first practice for several years!)

BMW as a long history of automobile manufacturers, must have a set of their own naming. In the early (BMW natural intake era) is actually quite easy to remember, such as the BMW 325i models, 3 on behalf of the 3 series, 25 represents the 2.5L displacement, i represents the gasoline engine. But in the BMW into the turbo era, although still three-digit naming rules, but the middle of the two figures are not directly linked with the displacement, such as 2.0T displacement, but there are 328, 320 high and low two power specifications (5 series or even appeared 520,525,528 low three high 2.0T power). Even more troublesome is that you 2.0T high power called 328 called 328 chant, the new 3 series actually changed its name to 330 ... o (╯ □ ╰) o of course, this is not the most troublesome, earlier 3 Equipped with 1.6T four-cylinder engine was named 316, and now dress up 1.5T three-cylinder engine even named 318 (⊙ ﹏ ⊙). Well, do not say before, and say more you estimate the direct halo of the game. For the current BMW, the simple summary is: 1.5T named 18,2.0 T named 20/25/28/30, 3.0T named 35 / 40,4.0 named 50,6.6T named 60.

Finished the BMW, do not say Mercedes-Benz is not appropriate? In fact, Mercedes-Benz and BMW, have adopted the natural number as the displacement, but the BMW is double-digit, while the Mercedes-Benz is three digits. And Mercedes-Benz and BMW have improved with the engine power, the phenomenon of large numbers, which also led to even the same name, the old and new models are very different displacement. For example, earlier E260 equipped with a 1.8T turbocharged engine, and then into a 2.0T turbocharged engine, to the recent listing of the new Mercedes-Benz E-class, the direct cancellation of the E260 this model, into the E300. Is it interesting? So Mercedes-Benz models really can not just look at the rear logo can rashly determine its displacement, have to be based on vehicle age. But since this article is said that the rear logo, then naturally have to say something, okay. The end of the standard 180 is used in the 1.6T engine; 200 (A, B, GLA level excluded) / 220/260/300 is used 2.0T engine; 320/400/450 are 3.0T; 500 was 4.0T engine. As for why just said that the tail of 200 to plan out of A-level, B-class and GLA level, because these three cars have not yet replaced, the use of old power or old-fashioned naming methods, and the three vehicles on behalf of the 200 1.6T engine rather than 2.0T engine.
Full text summary: said so much, do not know you look dizzy no. Although this is the most complete car prices naming rules, but I am afraid there will be more car prices in the future to join them. In fact, remember it does not matter, as long as the same figure to remember the number of the greater the better power is enough.