Repair Note: 1, if the replacement of the steering angle sensor G85, steering assembly with steering control unit J500, steering column switch assembly with control unit J527, made a wheel positioning adjustment, or failure code: "00778 ", You need to do the steering zero (intermediate position) position setting.
    Note: When the steering zero setting is made, the engine can not be operated. When the steering wheel rotates left and right and then returns to normal, the hands must leave the steering wheel so that the steering wheel is stationary so that the control unit can confirm the parts.
    Steering zero position setting method:
    1) the front wheel to maintain a straight line running state, with VAS5051 input address word 44, steering wheel turn left 4 ° ---- 5 ° (usually 10 ° can be), back to the right and then turn right 4 ° --- -5 ° (usually within 10 ° can be), the direction back, his hands away from the steering wheel;
    2) Enter the function word 11 (coding11), then enter 31857, then press the return key "←", enter: 04 ---- 60, then press the "activate" button, exit 5051, turn off the ignition switch 6 seconds later The
    2, if the replacement of the steering angle sensor G85, steering assembly with steering control unit J500, steering column switch assembly with control unit J527, made a wheel positioning adjustment, or failure code: "02546", need to do Steering limit position setting.
    Note: After setting the steering zero position (middle) position setting and steering limit position, you must use 5051 to enter 44 ---- 02 to inquire that the steering system is faulty and the setting work can be finished.
    Steering limit position setting method:
    1) the front wheel in a straight line driving state, start the engine, turn the steering wheel to the left about 10 °, pause 1 ---- 2 seconds, back to positive; then turn right about 10 °, pause 1 ---- 2 seconds Back to the steering wheel, pause 1 ---- 2 seconds;
    2) Then the steering wheel to the left hit the end, pause 1 ---- 2 seconds, and then hit the right in the end, pause 1 ---- 2 seconds, turn the steering wheel, turn off the ignition switch, 6 seconds after the entry into force.
    3, turn the power to set the size of the method: 5051 into: 44 ---- 10 ---- 01 5051 screen in the bar, select a suitable power (0 ---- 15 block ), Then press the "Save" button, and then press "Accept", then the screen will display the name of the new help power size, and then press "←" to exit.
    POLO repair Note: 1, if the replacement of the steering angle sensor G85, steering assembly with steering control unit J500, steering column switch assembly with control unit J527, made a wheel positioning adjustment, or failure code: 00778 ", you need to do the steering zero (intermediate position) position setting.
    Note: When the steering zero setting is made, the engine can not be operated. When the steering wheel rotates left and right and then returns to normal, the hands must leave the steering wheel so that the steering wheel is stationary so that the control unit can confirm the parts.
    Steering zero position setting method:
    1) the front wheel to maintain a straight line running state, with VAS5051 input address word 44, steering wheel turn left 4 ° ---- 5 ° (usually 10 ° can be), back to the right and then turn right 4 ° --- -5 ° (usually within 10 ° can be), the direction back, his hands away from the steering wheel;
     2) Enter the function word 11 (coding11), then enter 31857, then press the return key "←", enter: 04 ---- 60, then press the "activate" button, exit 5051, turn off the ignition switch 6 seconds later The