Model: Shanghai Volkswagen full range of models
    Motor initialization steps:
    1. First ensure that the sunroof motor and mechanical group must be in the "zero";
    2. Disassemble drive cover
    3. Pull the plug control unit to the motor plug, pull, insert delay time should be greater than 3S, and then in accordance with the first to connect the gear switch, then connect the power to connect the order;
    4. Rotate the position switch clockwise from the closed position by an angle (approx. 15 degrees) and return the switch to the close position quickly before the motor is running and press the end of the shift switch (this is done with the emergency shutdown function, And should be completed in the switch back to the closed bit 5S), the sunroof began to enter the initialization process, that is, automatically complete the full open - off - tilt - close the complete operation;
    5. When the skylight is closed, the gear switch is released and the initialization is completed.
    Precautions:
    1. The maintenance station should first check the "zero" of the skylight motor and sunroof mechanical group before the fault of the sunroof motor is faulty (except that the sunroof motor itself does not work). Then, the necessary initial operation of the motor is carried out.
    2. If there is an abnormality in the process of motor initialization, pay attention to whether the connection sequence of motor and gear switch and power supply meet the requirements, that is, connect the gear switch first, then connect the power plug, if you can not complete the initialization, consider replacing Motor
    3. After the completion of the motor initialization, you can carry out the normal skylight operation, if the subsequent operation of the abnormal phenomenon occurs, should focus on checking the skylight mechanical group (track lubrication is good, whether too much dust caused by running too much resistance, Whether the track or transmission mechanism is mechanically deformed, etc.).