First, the initialization (for the new remote control, you must be the new remote control and the original remote control together with the receiver to initialize if the user lost a remote control, the temporary allocation of the new remote control, the original Remote control re-initialization, the loss of remote control failure)
    Set up steps:
    1, turn off the ignition switch;
    2, all door contact switch off (that is, close all doors);
    3, the programming line (in the central junction box by the receiver harness connector pin 22 leads to a blue band with a harness) ground (ground);
    4, open the ignition switch;
    5, and then turn off the ignition switch;
    6, remote control receiver into the 60s programming mode;
    7, if the door lock was originally locked, then all the doors will be unlocked that remote control receiver programming mode;
    8, in 10s by remote control remote control any button twice, twice the interval of about 2s.
    9, the programming is completed, the door lock will be locked and unlocked once to confirm.
    10, for the second remote control transmitter repeat steps 8,9;
    11, the programming line recovery, initialization ended.
    Second, the new 3000 remote control match
    New 3000 car no programming line, then how to enter the programming mode?
    A: continuous switch ignition switch 3 times, it entered the programming mode, and the same as the old 2000.