2000 style A33 car engine brake flameout:
Elasticity A33 engine intake manifold is made of plastic material, its inner surface smooth, Coke mostly difficult to attach to the intake manifold but attached to the throttle body and idling motor. So that the idle air intake at the time of reduction, idling motor running resistance increases, resulting in slow adjustment. At this point if you use the detector to read the data stream can be seen, the number of idle motor parts greater than 10 steps.
Troubleshooting methods:
Cleaning throttle body and idling motor attached to the coke, and for the idle system basic settings, you can use the detector or manual settings. Manually set the method is as follows: the engine idling no load operation and reach the normal working temperature, in 5s unplug and plug the throttle body on the brown plug, observe the data flow speed of 650 ~ 750r / min, idling motor opening in the 2 to 10 steps can be between.
|