One: Toyota "overbearing" remote control match
Toyota "overbearing" remote control match open the driver's side door, close the door lock switch unlock. Insert the key into the pull out, manually operate the control switch to do "open - off" five cycles (lock → unlock for a cycle, a cycle time of 2 seconds).
Close the driving side door and then open, and then manually operate the control switch 5 cycles.
The key key → keyoff two cycles, in the process of the body computer will let the control automatically lock → unlock twice, this means that the rewrite mode is selected.
Press and hold the "lock" key, then the door lock will automatically lock and unlock 1, that has been successful login, if the two said that the failure, the lock " To log in again.
Two: Toyota Camry 2.4 remote control set procedures
Toyota Camry 2.4 remote control set procedures
1. Drive the door lock and unlock, pull out the ignition key;
2. Insert and remove the remote control key twice within 5 s;
3. Close and open the driver's door twice in 40s;
4. Insert the ignition key and remove it;
5. Close and open the driver's door twice in 40s;
6. Insert the ignition key;
7. Close all doors;
8. Turn the ignition switch at 1 s intervals and select the remote key setting mode according to the ignition switch position from "LOCK" to "ON" times:
A) LOCK-ON1 times, increase the mode;
B) LOCK-ON2 times, reprogramming mode;
C) LOCK-ON3 times, confirmation mode;
D) LOCK-ON5 times, protection mode;
9. Remove the ignition key;
10. Confirm that the selected setting mode can be confirmed by the number of cyclic reactions that are locked and unlocked by the central door lock, since the number of central reactions corresponds to the number of times in step 8. Note that the confirmation mode and the protection mode have been selected, and opening the door will exit the program.