Sato Odyssey car remote control match set steps:
    Honda remote control, Odyssey remote control receiver device memory can store up to three remote control code, if you want to store a third party 4 code, the first input of the code will be erased.
    (Note: to ensure that the time interval between the steps is very important to ensure that the door, the engine cover and tailgate are closed)
    Matching steps:
    1, set the ignition switch to the ON position.
    2, the remote control at the remote control switch next to the remote control receiver, in 1-4s, press the remote control to unlock or lock button.
    3, in 1-4s, the ignition switch to OFF.
    4, in 1-4s, turn the ignition switch to ON.
    5, the remote control at the remote control switch next to the remote control receiver, in 1-4s, press the remote control key or lock button.
    6, in 1-4s, the ignition switch to OFF.
    7, in 1-4s, turn the ignition switch to ON.
    8, the remote control at the remote control switch next to the remote control receiver, in 1-4s, press the remote control key or lock button.
    9, in 1-4s, the ignition switch to OFF.
    10, in 1-4s, turn the ignition switch to ON.
    11, the remote control at the power window control switch next to the remote control receiver, in 1-4s, press the remote control key or lock button.
    12, be sure to hear the action of the door lock actuator sound, in 1-4s, press the remote control lock or lock button again.
    13, within 10s, you will need to store the code's remote control (up to 2 more) in the remote control receiver, align the receiver, and then press the remote control's unlock or latch button. After each remote control password is stored, it must be confirmed that the action sound of the door lock actuator can be heard.
    14, turn the ignition switch to OFF to pull out the key.
    15, to determine the remote control to work properly.