The remote key is set when the following conditions are required: Remote key is added or replaced; system is faulty. The remote control key is set as follows:
    (1) Take out all the remote control keys (up to 3 remote keys can be set).
    (2) Place the ignition switch in the "ON" position, repeat the following steps 3 times:
    A. In 4s, press the lock or unlock button.
    B. Within 4s, turn the ignition switch to the "OFF" position.
    C. Within 4s, turn the ignition switch to the "ON" position.
    D. In 4s, press the lock or unlock button.
    (3) the system will immediately lock or open the vehicle.
    (4) within 4s, press the lock or unlock button.
    (5) within 10s:
    A. Press the first remote key to lock or unlock the key. The system will immediately lock or open the vehicle.
    B. Press the second remote key to lock or unlock the key. The system will immediately lock or open the vehicle.
    C. Press the third remote key to lock or unlock the key. The system will immediately lock or open the vehicle.
    (6) Turn the ignition switch to the "OFF" position and pull out the ignition key.
    (7) Check the operation of all programmed remote keys.