1) If there is an error during the adaptation process (except for the case of PCM replacement), repeat the operation procedure. If the adapter can not be completed, make sure that the key can start the engine and then perform the key change or increase the key according to the effective key number With the program.
     2) When the key is set or the electronic anti-theft device (IMM) component (key or PCM) is replaced, the previously adapted key will be erased.
     3) PCM can not be retrofitted from one car to another. If the PCU is replaced from one car to another, it will not start.
     4) If you do this, the ID and code will be programmed into the new unit, and even if the previous unit is normal, the PCM can not be used with other cars.
     5) Can not remove IMM.
     6) After repeating the program, confirm that all keys are able to start the engine, and confirm that the interval is above 5S before inserting the next key.