Initialization (for the new remote control, the new remote control and the original remote control must be synchronized with the receiver.If the user lost a remote control, the temporary allocation of the new remote control, the original remote control Re-initialization, the loss of remote control failure)
    Set up steps:
    1, turn off the ignition switch and all the doors;
    2, the programming line (in the central junction box by the receiver harness connector pin 22 leads to a blue band with a harness) grounding (ground);
    3, open the ignition switch and then turn off the ignition switch, then enter the 60s programming mode;
    4, if the door lock was originally locked, then all the doors will be unlocked remote control receiver into the programming mode.
    5, in 10s press any button on the remote control twice, twice the interval of about 2s;
    6, the programming is completed, the door lock will be locked and unlock each time to confirm.
    7. Repeat steps 5 and 6 for the second remote transmitter.
    8, the programming line recovery, initialization ended.
    Remote control and remote control receiver resuscitation (for the original remote control remote control in the effective remote control distance out of 255 consecutive times, or a long time to lose power (such as the replacement of the battery for a long time), remote control and remote control receiver Can not be synchronized, can no longer remote control open and close the door lock, you must re-sync)
    Set up steps:
    1, close all the doors, so that the lock is open;
    2, open the ignition switch;
    3, press the remote control remote control key in 30S;
    4, if the synchronization is successful, the door lock will be locked and open each to confirm.